Browse By

Tag Archives: ham

Building an automatic gain control (AGC) circuit

Most amplifiers we use have a fixed gain. In case of excess input power, the amplifier saturates. As a result, the blocks down the receive chain also get affected by this. To avoid this, the preferred technique is to reduce the gain of the amplifier

If you liked this article, feel free to share it. It will help us a lot!
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Cable impedance profile with NanoVNA and TDR script

We have gone over NanoVNA so many times in the past. I did a complete review of the inexpensive NanoVNA last month. Furthermore, I compared it with the super-expensive Keysight N9952A Vector Network Analyzer. Finally, I wrote a small script to compute the TDR response

If you liked this article, feel free to share it. It will help us a lot!
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

A simple voice detector circuit

Voice detector can find it’s use in voice-activated circuits. For example, triggering a transmitter or enabling a speech processor and so on. At the end of this blog post, we will look at one such application. A voice detector is a circuit which will either

If you liked this article, feel free to share it. It will help us a lot!
  • 88
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
    88
    Shares