Radar Beamforming to track target
he Matlab phased array toolbox is a collection of many interesting algorithms and functions. With so many tools at your disposal, the phased array toolbox lets us build a complete end to end radar...
Category: Electronics
Transferring a text file over the air with LimeSDR mini
We have seen the LimeSDR mini several times on this blog. So far, we have only seen how it can generate analog modulation to transmit voice and what not. Being an SDR capable to...
Building an automatic gain control (AGC) circuit
Most amplifiers we use have a fixed gain. In case of excess input power, the amplifier saturates. As a result, the blocks down the receive chain also get affected by this. To avoid this,...
Cable impedance profile with NanoVNA and TDR script
We have gone over NanoVNA so many times in the past. I did a complete review of the inexpensive NanoVNA last month. Furthermore, I compared it with the super-expensive Keysight N9952A Vector Network Analyzer....
Comparing NanoVNA with the Keysight Fieldfox N9952A
Vector network analysers (VNA) come in all sort of price ranges. Most of them are out of reach for a typical hobbyist. Very few VNAs are available to be bought by someone like you...
NanoVNA – A short review
Do you build RF circuits? Have you built any antennas? If the answer to any of the two questions is YES, then you know how valuable having a VNA (Vector Network Analyzer) is. Just...
Using LimeSDR mini as a RF source
In one of the previous posts we saw how we could transmit DATV using LimeSDR mini. This time we are going to use our LimeSDR mini as a RF source in our home lab....
Manual VCO selection for a faster locking PLL
PLL chips such as the ADF43xx, MAX287x and so on come with an integrated VCO. The frequency range on these PLL chips can extend all the way from few tens of MegaHertz to several...
A simple voice detector circuit
Voice detector can find it’s use in voice-activated circuits. For example, triggering a transmitter or enabling a speech processor and so on. At the end of this blog post, we will look at one...
RF Pulse generation with RF switch
Remember the previous post where we generated PWM? We are going to use the PWM output from the TivaC microcontroller and drive an RF switch. I will be using the Minicircuits HSWA2-63DR+ SP2T switch...
Voice of the people